Bulletin | Karrykrimp 2 |
Tool Selection Chart |
|
|
|
For Reference Only
Notes:
This chart is displayed on the yellow cover of the Karrykrimp 2 machine.
The 43 Series dies listed are interchangeable between all of the Parkrimp machines. The die rings are not interchangeable between machines. Use only
For a complete selection of hose and fittings, see Parker Catalog 4400.
Caution: To ensure consistant quality, crimp diameters must be checked:
1.After first assembly
2.At regular intervals during the production, such as first, last and every 50th assembly.
If you find your crimp diameters out of tolerance, inspect each assembly made. Never allow hose assemblies with an incorrect crimp diameter to be used. Use the appropriate Parker Machine Trouble Shooting Guide to determine the cause. If you are unable to determine the cause of the problem, call our Hose Products Division Technical Services Department at (440)
Additional Hose Die Selection Charts are available upon request from your Parker supplier.
9 | Parker Hannifin Corporation |
| Hose Products Division |
Wickliffe, OH