![Ordering Information – Inlet Cover](/images/new-backgrounds/199295/19929531x1.webp)
Catalog | |
Ordering Information – Inlet Cover | VO40 |
|
|
The inlet cover of VO40 is available in two versions. One is the standard inlet and the other is an inlet with a sole- noid pump unloader (in development). The porting location options for the standard inlet are:
1)Top/side – inlet and outlet ports. Any unused ports can be plugged.
2)Top – inlet and outlet ports only.
All inlet bodies have a gage port, that comes plugged. SAE #4 (7/16"x20 UNF thread) or 1/4" BSP. The coding to specify an inlet cover is accomplished by eight fields, as shown below:
[12] – Max Pump Flow
The pump inlet flow can be selected in LPM or GPM.
[15]– Type of Inlet
I Standard Inlet.
IU Inlet with pump unload, solenoid actuated (in development).
[24] to [27] – Inlet Porting Options
1) Standard – Top & Side Inlet/Outlet Ports | 2) Standard – Top Inlet/Outlet Ports |
INLET OUTLET
GAGE
TANKTANK
OPEN
INLETCENTER
PARALLEL
PATH
INLET
GAGE
OUTLET
TANK
OPEN
CENTER
PARALLEL
PATH
12 | Parker Hannifin Corporation |