![[62] – Piston Head Side of Cylinder](/images/new-backgrounds/199295/19929547x1.webp)
Catalog | |
Ordering Information – Work Sections | VO40 |
|
|
[62] – Piston Head Side of Cylinder
The default for this field is code M. Codes A and B are only used when asymmetrical spools must be developed. For example, a cylinder that requires
MStandard symmetrical spool- cylinder or motor.
APiston head connected with port “A”.
BPiston head connected with port “B”.
[76 A/B] – Work Port Valves
RV/AC | |
Check |
|
This pertains to the work port accessory options.
/Port not machined.
Y2 Relief Valve cavity plugged.
N2
( ) RV/AC
C2
Y plug for blocking
RV cavity
[88 A/B] – Work Port Option
/No Restrictor.
Work port restrictors restrict flow in one direction and are free flow in the opposite direction.
Restrict flow “out” of actuator “into” work port.
P1 = 1mm (0.040") | ACTUATOR | |||
P2 | = 2mm (0.080") | METER OUT | ||
|
|
| ||
P3 = 3mm (0.120") |
|
| FREE | |
|
| |||
P4 | = 4mm (0.160") |
|
| |
| ||||
|
|
| ||
|
|
|
|
|
Restrict flow “out” of work port “into” actuator.
N1 = 1mm (0.040") | ACTUATOR | |||
|
| |||
N2 | = 1mm (0.080") | METER IN | ||
|
| FREE | ||
|
| |||
N3 | = 1mm (0.120") |
|
| |
|
|
| ||
N4 = 1mm (0.160") |
|
|
| |
|
|
| ||
|
|
|
|
|
[90] – Spacer Section
NSpacer Section.
This section connects the open center, parallel path and tank cores between two adjacent work sections. This section is used to provide additional spacing between two work sections. All other fields in the work section code can be left blank. (Contact Parker for size options available.)
TANK
OPEN CENTER
TANK
OPEN
CENTER
PARALLEL PATH
PARALLEL PATH
20 | Parker Hannifin Corporation |