Patton electronic 2073 user manual Service, tel email support@patton.com, Features, Description

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at:

tel: (301)975-1007

email: support@patton.com

www:http://www.patton.com

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 2073. Technical Service hours: 8AM to 5PM EST, Monday through Friday.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant- ed for One Year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to con- tact Patton Electronics Technical Support at (301) 975-1007.

2.1 FEATURES

•Bi-directionally converts V.24, X.21,V.35 or 10 BaseT to co-direc- tional G.703

•LED indicators monitor Test Mode and Synchronization

•Internal, external or network clocking options

•Test Mode controlled by switch or by local DTE (V.24 and V.35 Versions Only)

•Complies with CCITT/ITU G.823 Jitter Control Specifications

•Built-in surge protection and transformer isolation

•Point-to-Point distance up to 5250 ft (1600m) on 24 AWG twisted pair

•120 ohm (twisted pair) network termination

2.2 DESCRIPTION

The Patton Model 2073 standalone interface converter/rate adapter allow a synchronous V.24, V.35, X.21 or ethernet device to communicate bi-directionally over the G.703 co-directional PCM net- work. Supporting internal, external DTE timing or G.703 network gen- erated timing, the Model 2073 is perfect for networking applications that require speeds of 9600 bps to 64 kbps. The Quick-Connect style of interchangeable interface modules for the 2073 allow various physi- cal and electrical interfaces to connect to the 64K synchronous G.703 network.

A 120 ohm twisted pair telephone port provides the interface for the G.703 network. Additionally, 75 ohm terminations can be made using the Patton Model 460 (G.703 balun).

Diagnostics include Local Loopback and G.703 Loopback testing. Synchronous clock jitter is attenuated in accordance with the G.823 specification.

3 4