Patton electronic 2172 user manual CONFIGURING DIP SWITCH S2

4.2 CONFIGURING DIP SWITCH S2

DIP switch S2 is where you configure the CopperLINK line rate, symmet- ric or asymmetric, Ethernet, and Ethernet Shutdown. Table 1 summa- rizes default positions of DIP switches S2-1 through S2-8. Detailed descriptions of each switch follow the table.

	Table 1: S2 Summary
Position	Description
S2-1	Symmetric/Asymmetric
S2-2	Line Rate
S2-3	Line Rate
S2-4	Ethernet configuration
S2-5	Ethernet configuration
S2-6	Ethernet configuration
S2-7	Ethernet Shutdown
S2-8	Remote Configuration

Switch S2-1: Symmetric/Asymmetric Operation

Use switch S2-1 to configure the unit for symmetric or asymmetric opera- tion..

Table 2: Ethernet Auto Sense Selection Chart

S2-1	Setting
ON	Symmetric Operation
OFF	Asymmetric Operation

Switches S2-2 and S2-3: Data Rate

Use switches S2-1, S2-2 and S2-3 to configure the CopperLINK line rates.

Table 3: Symmetric CopperLINK Line Rates Selection Chart

S2-2	S2-3	Symmetric Line Rate
OFF	ON	50 Mbps
ON	OFF	25 Mbps
OFF	OFF	10 Mbps

14