Patton electronic 2190 user manual Operations, LED Status Monitors

5.0 OPERATIONS

Once you have configured the Model 2190 properly. You are now ready to operate the unit. The following section describes the LED sta- tus monitors.

5.1 LED STATUS MONITORS

The Model 2190 features eight front panel LEDS. Figure 2 below shows the front panel location of each LED. Following Figure 2 is a description of each LED’s function.

	Figure 2. Model 2190 Front Panel
MR (Modem Ready):	Lights up when the power switch turned on.
HS (High Speed):	Lights up when the modem connect at
	9,600bps or above.
AA(Auto Answer):	Lights up when the modem is set to Auto-
	Answer mode.
CD (Carrier Detect):	Lights up when the modem detects the
	remote carrier. It means the modem is con-
	nected.
OH (Off-Hook):	Lights up when off-hook.
SD (Send Data):	Flashes when the computer or terminal is
	sending data to the modem.
RD (Receive Data):	Flashes when the modem is sending data to
	computer or terminal.
TR (Terminal Ready):	Lights up when the computer or terminal is
	ready to receive data.

APPENDIX A

PATTON ELECTRONICS MODEL 2190

SPECIFICATIONS

Modulation:	Multi-dimension TCM (2400 - 56000bps),
	QAM & TCM (4800 - 14400bps)
Compatibility:	ITU-T V.34/V.32bis/V.32/V.22bis/V.22/V.21
	/V.23, Bell 103/212A, ITU-T V.90, K56flex
Operation:	Half or Full Duplex over 2-Wire PSTN
DTE Speed:	Max.: 230,400bps
Error Control:	ITU-T V.42 and MNP4
Compression:	ITU-T V.42bis and MNP5
Command Compatible:	Hayes AT Command Set
Diagnostic:	ITU-T V.54 Power On Self-Test
Flow Control:	RTS/CTS, Xon/Xoff
Retrain:	Auto- or Manual-Retrain with fall forward/fall
	back rate negotiation
Storage:	Maximum 4 telephone numbers and 2 user
	profiles
Receive Sensitivity:	-43 dBm
Fax:	ITU-T V.17/V.29/V.27ter/V.21 ch2
	EIA Class 1; G3 Fax support
Voice:	Full duplex speakerphone
Terminal Interface:	EIA RS-232C D-type 25 pin connector with
	ITU-T V.24/V.28 recommendation
Environment:	Ambient Temperature from 0°C - 40°C
	Relative Humidity: from 10% to 95%
	non-condensing
Power Requirement:	120/230 VAC 50/60 Hz via External
	Transformer
Dimension:	161mm (L) X 167mm (W) X 37mm (H)

21 22