Patton electronic 2603, 2620 Complete the installation, A.0 Customer and Technical Support

Connecting to the RJ-48C WAN port

1.Obtain a twisted-pair cable with an RJ-48C plug connector at each end.

2.Plug one end of the cable into the RJ-48C socket (labeled WAN) on the IPLink Router.

3.Plug the other end of the cable into the T1/E1 device.

4.Repeat steps 1 through 3 to install the remaining WAN cables on a Model 2620

Connecting to the unbalanced 75-ohm TX and RX WAN ports (Model 2603/K and 2620/KK only)

1.Obtain a coaxial cable with a BNC connector at each end.

2.Plug one end of the cable into the transmit socket (labeled TX) on the IPLink Router. Plug the other end of the cable into the receive port of the E1 device.

3.Plug one end of the cable into the receive socket (labeled RX) on the IPLink Router. Plug the other end of the cable into the transmit port of the E1 device.

6.0 Complete the installation

To finish configuring your IPLink, and for detailed information about installing, configuring, operating, and trou- bleshooting, refer to the Models 2603, 2621, and 2635 IPLink Series High Speed Routers User Guide and appli- cation notes, available on the enclosed Patton CD-ROM or at www.patton.com.

A.0 Customer and Technical Support

Toll-Free VoIP support: call sip:support@patton.com with a VoIP SIP phone

Online support: www.patton.com

E-mail support: support@patton.com—answered within 1 business day

Telephone support:

•Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to 2200 UTC/GMT)

•Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800 UTC/GMT)

Fax: +1 (253) 663-5693 (USA) or +41 (0)31 985 25 26 (Switzerland)

6 IPLink 2603 & 2620 Quick Start Guide