Patton electronic 275, 2715, Network Hardware instruction

Copyright © 2006

Patton Electronics Company

All Rights Reserved.

Image 21

Patton electronic 275, 2715, Network Hardware user manual Copyright Patton Electronics Company All Rights Reserved

Contents

User Manual Patton Model Table of Contents Warranty StatementGeneral Information Radio and TV Interference Service InformationCE and Telecommunication Approvals Tel 301 Email support@patton.com General Product Description FeaturesSupported Applications 2715 as the Interface between the Telco and CPE DIP Switch Configuration ConfigurationSwitch SET Summary Table Switch SW1 Line Coding CRC-4 MF MULTIFRAMEG.704Unframed G.703 SW3 SW4 Clock Modes Software Configuration Helpful Hints Introduction to Main Menu System Configuration Line Format G.703 default Options G.703, G.704Line Coding HDB3 default CAS MF Setting Disabled default Options Enabled, Disabled CRC-4 Setting Disabled default Options Enabled, Disabled54 Loops Enabled default Options Enabled, Disabled Default Config Source Switch default Options EEPROM, Switch Local Loop Idle default System Diagnostics Test Pattern Idle default Options Idle or Sending Remote Loop Idle defaultError Insertion Off default Options On, Off Spacebar Password Current DIP Switch SettingsNI Status Unit Options Network Interface Connection DTE Interface Connection LED Descriptions Power ConnectionTXD RXD LOS Loop V.54 & Telco DiagnosticsALM ERR Error Insertion to on BIT Error Rate V.52 Diagnostics511 2047 Patton Model Cable Recommendations Specifications DB9F Appendix C Patton Model Power Supply Interface Connector, Terminal InterfaceJumper Position for Power via DC Power Jack default Jumper Position for Power via Pin KK Copyright Patton Electronics Company All Rights Reserved