Patton electronic 3087 Log onto the GUI web management page, Connect to the G.SHDSL Port

4.0 Log onto the GUI web management page

You will now access the web management graphical user interface (GUI) to configure the ipRocketLink using a standard web browser (such as Netscape or Internet Explorer).

1.At your PC, open a web browser and enter the IP address you assigned to the ipRocketLink’s Ethernet LAN port in step 2 of 2.2 “Modify the IP address”.

2.Log into the web management home page using the username superuser and the password superuser. (See figure 3.)

Figure 3. Model 3087 web management home page

5.0Connect to the G.SHDSL Port

1.Obtain single-twisted-pair cable with an RJ-11 plug connector at each end.

2.Plug one end of the cable into the (yellow) RJ-11 socket (labeled DSL) on the ipRocketLink Integrated Access Device.

3.Plug the other end of the cable into the RJ-11 wall socket that provides your G.SHDSL service.

4.When a DSL link is established, the front-panel WAN LINK LED will turn on.

6.0Connect the serial port

Your ipRocketLink is equipped with one of the following serial WAN ports for connection to an NTU:

•V.35 (M/34 or DB-25) – Model 3087/RIC/EUI

•X.21 (DB-15) – Model 3087/RID/EUI

•T1/E1(RJ-48C and dual BNC) – Moel 3087/RIC/EUI

Model 3087 Quick Start Guide 5