Patton electronic 3201 quick start Power up the router, Models with external AC adaptor

•This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel.

WARNING

•The external power adapter shall be a listed Limited Power Source. The mains outlet that is utilized to power the devise shall be within 10 feet (3 meters) of the device, shall be easily accessible, and protected by a circuit breaker.

•If an AC power adapter is used, ensure that the power cable used meets all applicable standards for the country in which it is to be installed, and that it is connected to a wall outlet which has earth ground.

•Hazardous network voltages are present in WAN ports regard- less of whether power to the unit is ON or OFF. To avoid electric shock, use caution when near WAN ports. When detaching the cables, detach the end away from the device first.

•Do not work on the system or connect or disconnect cables during periods of lightning activity.

1.0 Power up the router

The interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flam- mability, and mechanical serviceability.

CAUTION

Your G.SHDSL router comes with one of the following power supply options:

•External AC adaptor with included power cord

•External DC power supply

1.1 Models with external AC adaptor

1.Connect female plug of the AC power cord to the AC adaptor provided.

2.Connect the barrel-type connector of the AC adaptor to the Power connector on the DiamondLink router.

3.Insert the male plug of the AC power cord into an AC power outlet (100–240 VAC).

2 DiamondLink 3201 & 3241 Quick Start Guide