Patton electronic 3201 Connect to the local IP network, Log onto the web management interface

3.0 Connect to the local IP network

Now you can connect the DiamondLink to your local IP network and complete the remaining configuration from your PC using a standard web browser.

Connect the DiamondLink’s (green) Ethernet port to the same Ethernet segment as your PC (see figure 3). Press the MDI-X switch until the Ethernet Link LED turns on.

Power

	Connect to Ethernet port
	(green port)	PC
	Line
Ethernet	-X
	MDI
Console	MDI-X switch

Ethernet port

Figure 3. Connecting the DiamondLink to the local IP network

You can check the network connection with the ping command. For example, you would ping 10.10.10.5 from your PC.

4.0 Log onto the web management interface

You will now access the web management Graphical User Interface (GUI) to configure the DiamondLink using a standard web browser (such as Internet Explorer or Netscape browser).

1.At your PC, open a web browser and enter the IP address you assigned to the DiamondLink’s Ethernet LAN port in step 2 of section 2.2 “Modify the IP address” on page 4.

2.Log in to the web management home page using the username superuser and the password superuser.

Figure 4. DiamondLink web management home page

DiamondLink 3201 & 3241 Quick Start Guide 5