Chapter 4 Getting started with the SmartNode
Chapter contents |
|
Introduction | 44 |
1. Configure IP address | 45 |
Power connection and default configuration | 45 |
Connect with the serial interface | 45 |
Login | 46 |
Changing the IP address | 46 |
2. Connect the SmartNode to the network | 47 |
3. Load configuration | 47 |
Bootloader | 48 |
Start Bootloader | 48 |
49 | |
Load a new application image (SmartWare) via TFTP | 49 |
Load a new application image (SmartWare) via the serial link | 51 |
Additional information | 51 |
43