Installing the Charger, Setting the Power Supply

2. Installing the Charger

The charger may be mounted to the wall or set on a sturdy table. Before installing the charger

✓set the power supply for the voltage in your area.

✓select a location for wall mounting or table top use.

✓perform the power on test.

When you first receive the charger, the power supply is factory pre-set:

∙6094-01 is 120 VAC with 1A fuses.

∙6094-02 is 220/240 VAC with .5A fuses.

∙6094-03 is 100 VAC with 1A fuses.

To reset the power supply for 100, 120, 220, or 240 VAC:

1.Turn the power OFF.

2.Unplug the power cord.

3.Use the tip of a screwdriver or pen to open the fuse box as shown. The fuse box is located on the left side of the charger beside the power switch.

Fuse Box