Control PanelInstallation en 5
2 | Installation |
2.1 | Installation Preparation |
| This section contains a general installation procedure and refers to other sections of the |
| document for detailed instructions. Review this document and the D9412GV4/D7412GV4 |
| Program Entry Guide (P/N: F01U265459) before beginning the installation to determine the |
| hardware and wiring requirements for the features used. Have the following documentation |
| available when reading through this guide: |
| – D9412GV4/D7412GV4 Installation and System Reference Guide (P/N: F01U265457) |
| – D9412 GV4/D7412GV4 v2.00 Owner’s Manual (P/N: F01U265452) |
2.2 | Enclosure Options |
Mount the control panel assembly in any of the Bosch Security Systems, Inc. enclosures listed:
–D8103 Universal Enclosure (tan)
–D8109 Fire Enclosure (red) for the D9412GV4 and D7412GV4 Control Panels
–D8108A Attack Resistant Enclosure (tan)
Refer to the Approved Applications chapter inside the D9412GV4/D7412GV4 v2.00 Installation and System Reference Guide (P/N: F01U265457) to determine if the application requires a specific enclosure.
2.3 | Mounting Enclosure | |
| 1. | Run the necessary wiring throughout the premises. |
| 2. | Mount the enclosure in the desired location. Use all five enclosure mounting holes. Refer |
|
| to the diagram for mounting locations and descriptions. |
| 3. | Pull the wires into the enclosure. |
Bosch Security Systens, Inc. | UL Installation Instructions | 2012.12 02 F.01U.265.462 |
