INSTALLATION

The toaster must be level for proper operation and comes equipped with adjustable legs for this purpose. The receiving tray and delivery chute can now be installed (Figure A). Locate the four protruding pins inside the bottom front opening of the toaster. The two lower pins lock the receiving tray into position. The two upper pins support the delivery chute on one end. The other end of the chute rests on the lower pins so it lies at an angle from the conveyor to the receiving tray. The receiving tray is installed first. Tilt the tray so that the back end slides along the bottom of opening and passes under and behind the two lower pins (Figure B). With tray resting flat on bottom of opening, gently pull toward you until the back wall of tray is stopped by the pins (Figure C). The delivery chute is now installed through the same opening. The notches in the sides must be with the open side down (Figure A). Slide chute over the upper pins until they rest in notches, then lower chute so opposite end rests on the lower pins (Figure D).

ELECTRICAL INSTALLATION

The RT-2T toaster is available in 208V and 240V models. Voltage is specified on the data plate located on the back panel of the toaster.

CAUTION

is to be used with voltage specified On data plate only. Warranty will be void if is used with any other than voltage

Specified on data plate.

The RT-2T is factory supplied with a 6” power cord terminated in a NEMA approved plug as specified for the particular voltage. For single phase operation, select the mating recep- tacle to match the plug from the electrical specification chart shown.

The circuit on which the receptacle is installed must be of adequate wiring size and sufficient capacity to meet the requirements indicated on the toaster data plate, and in conformance with National Electrical Code and local electrical installation codes.

2

Page 6
Image 6
Merco Savory RT-2T operation manual Installation

RT-2T specifications

The Merco Savory RT-2T is a high-performance countertop steamer designed to meet the rigorous demands of commercial kitchens. This innovative piece of equipment is engineered to enhance food preparation efficiency while preserving the natural flavors, textures, and nutrients of ingredients. With its sleek design and advanced features, the RT-2T is perfect for restaurants, cafes, and catering operations that prioritize quality and speed.

One of the standout features of the Merco Savory RT-2T is its dual-tank steam system. This allows for consistent and uniform heating, ensuring that food is cooked evenly without compromising moisture content. The dual-tank design also helps prevent flavor transfer between different dishes, making it ideal for preparing a variety of menu items simultaneously. With a capacity suitable for multiple dishes, operators can streamline their cooking processes and reduce wait times for customers.

The RT-2T incorporates advanced digital controls, enabling precise temperature adjustments and cooking times. The intuitive interface allows chefs to program different cooking cycles, which can be saved for future use, thus ensuring repeatability in the kitchen. This technology minimizes food waste and maximizes efficiency, allowing staff to focus on their culinary creativity.

For safety, the Merco Savory RT-2T is fitted with an automatic shut-off feature and a safety drain system, which reduces the risk of overheating and simplifies cleaning. Its stainless steel construction ensures durability and resilience in the fast-paced kitchen environment. The exterior is easy to clean and maintain, providing a hygienic cooking environment that meets industry standards.

Energy efficiency is another hallmark of the RT-2T. Designed to operate with minimal energy consumption, it helps businesses reduce operational costs while still delivering high-quality cooking results. The steamer heats up quickly, allowing chefs to start cooking almost immediately, which is essential during peak service times.

In summary, the Merco Savory RT-2T is an exceptional countertop steamer that combines advanced technology with user-friendly features. Its dual-tank steam system, digital controls, and durable construction make it an invaluable asset in any commercial kitchen. With the RT-2T, chefs can elevate their food offerings while optimizing their workflow, resulting in satisfied customers and a thriving culinary business.