C o n n e c t i n g t h e P o w e r C o r d
Make sure to set the proper voltage on the charger voltage selector switch on the right side of the charger (115V in U.S. or 230V International). Incorrect voltage selection can result in charger failure. Connect the charger's power cord to the power inlet. Power cords are not included with International models. The charger's power switch is also on the right side.
Charger
Power
Switch
Voltage Selector
Power
Inlet
115 |
24VDC Charger
Power Cord
The battery's status LEDs are located on the left side of the Power Panel. The MWS Power Switch is to the right of the LEDs. See Chapter 3, "Charging the Batteries" for more information.
MWS
Power
Switch
Battery
Status LEDs
Power
Panel
Do not plug the external power cord into a wall outlet until you are ready to charge the battery. See Chapter 3, "Charging the Batteries" for important battery information.
