Peavey 115P manual Fuse, IEC Power Cord Connection

R E A R P A N E L

			5			11		7	8	9
							7d
4	5a	5e	5d	5b	5c	6	7a	7c	7b
10

10a

10b

3 1 2

Fuse (1)

The Impulse 115P is AC power line fuse protected from overload and fault conditions with an ABC-type fast- blow 15 Amp fuse. The fuse is located within the cap of the fuse holder. If the fuse fails, THE FUSE MUST BE REPLACED WITH THE SAME TYPE AND VALUE IN ORDER TO AVOID DAMAGE TO THE EQUIPMENT AND TO PREVENT VOIDING THE WARRANTY. If the amp repeatedly blows fuse, it should be taken to a qualified service center for repair.

WARNING: The fuse should only be replaced when the power cord has been disconnected from its power source!

IEC Power Cord Connection (2)

This receptacle is for the IEC line cord (included) that provides AC power to the unit.

Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To prevent the risk of shock or fire hazard, always be sure that the mixer and all other associated equipment are properly grounded.

It is very important that you ensure the Impulse 115P has the proper AC line voltage supplied. You can find the proper voltage for your Impulse printed next to the IEC line (power) cord on the rear panel of the unit. Please read this guide carefully to ensure your personal safety as well as the safety of your equipment.

5