Impulse® 115P

SPECIFICATIONS

Enclosure: Impulse® 115P (domestic)

Frequency Response:

45 Hz–120 Hz

Low Frequency Limit:

45 Hz

Usable Low Frequency Limit:

(-3 dB point) 45 Hz

Usable Low Frequency Limit:

(-10 dB point) 36 Hz

Internal Power Amplifier:

(@ 120 VAC line) Subwoofer Section only

1500 W peak dynamic power‚ bridged mode

1000 W continuous @ less than 0.3% distortion

Left & Right Output Section only

750 W peak dynamic power either channel All Channels Loaded Full

Subwoofer Section

750 W peak dynamic power

500 W continuous

Left & Right Output Section

375 W peak dynamic power either channel

250 W continuous

Nominal Sensitivity:

(1 W @ 1M swept sine input in anechoic environment): 95 dB

Maximum Sound Pressure Level:

128 dB peak

Transducer Compliment:

1508-8 HPS 15" Low Rider Bass woofer

Box Tuning Frequency (Fbox):

40 Hz

Electronic Crossover Frequency:

120 Hz

Crossover Type:

Internal electronic 2-way crossover with bass boost and 24 dB/octave subsonic filtering active soft-knee limiter on level controlled low pass. Variable high-pass output.

Crossover Slopes:

24 dB/octave (4th order) Linkwitz-Riley low- pass and driver EQ. 24 dB/octave (4th order) Linkwitz-Riley high-pass.

Full-range Input Connections:

One combo female XLR/1/4" phone jack providing balanced operation

Full-range Output Connection:

One male XLR balanced Thru connector.

High-pass Output Connection:

One male XLR connector

L & R Output Connections:

One Neutrik® Speakon® 4-pin connector each. Minimum speaker impedance

8 Ohms each.

Enclosure Materials & Finish:

Premium 19mm plywood‚ scuff-resistant Hammerheadpolyurea cabinet finish, black

Mounting:

This unit is NOT designed for overhead suspension. Satellite stand mounting via built-in mount and 4 large rubber feet for floor use.

Dimensions:

24.50" (62.2 cm) H x 21.00" (53.3 cm) W x 27.00" (68.6 cm) D

Weight:

Net weight: 112 lbs. (50.8 kg)

Shipping Weight:

123 lbs. (55.8 kg)

ELECTRONICS & AMPLIFIER SPECIFICATIONS

Electronic Input Impedance (nominal):

Primary balanced input: 10 koHms

unbalanced: 20 k Ohms balanced

Infrasonic filter Protection:

48dB/octave roll-off with active soft- knee limiter

Nominal Amplifier Frequency Response:

+0‚ -1 dB from 10 Hz–30 kHz

Hum & Noise:

Greater than 90 dB below rated power

Active Low-frequency Limiter Dynamic Range:

Greater than 60 dB

DDT Dynamic Range:

Greater than 18 dB

THD & IM:

Typically less than 0.3%

Damping Factor:

Typically less than 100 @ 1000 Hz‚ 8 Ohms

Power Requirements:

1300 W‚ 120 VAC‚ 60 Hz

50

Page 50
Image 50
Peavey manual Impulse 115P

115P specifications

The Peavey 115P is a robust and versatile powered speaker designed to meet the demands of various live sound and monitoring applications. Renowned for its compatibility with a range of audio systems, the 115P is an essential tool for musicians, DJs, and audio professionals looking for reliable performance and clarity.

At the heart of the Peavey 115P is its 15-inch woofer, which delivers powerful bass response and rich mids, making it suitable for everything from music performances to public speaking engagements. This woofer is complemented by a high-frequency compression driver that ensures crisp, articulate highs, blending seamlessly with the low-end sound to provide a well-rounded audio experience.

One of the standout features of the Peavey 115P is its integrated power amplifier, which boasts a substantial output. This amplifier eliminates the need for external power sources, making setup quicker and easier. Additionally, the speaker's onboard controls include a master volume knob and EQ settings, giving users fine control over their sound.

The 115P employs Peavey’s patented Circuitry, including Volume and Equalization controls that enhance overall sound quality. The speaker also incorporates a discrete Class D amplifier section, known for its efficiency and lightweight design, ensuring that the 115P not only sounds excellent but is also easy to transport.

Connectivity is another strong suit of the Peavey 115P. It features balanced XLR inputs, making it easy to connect to a variety of devices, including mixers and microphones. The speaker also includes a loop-through output for daisy-chaining additional speakers, allowing for expanded coverage in larger venues.

Constructed with durability in mind, the Peavey 115P is housed in a rugged enclosure that stands up to the rigors of touring and frequent transport. Its design includes integrated handles for easy lifting and maneuvering, and its lightweight profile adds to its portability.

In summary, the Peavey 115P is a powerful, flexible speaker system that excels in delivering high-quality audio performance for a variety of applications. With its impressive features, reliable technology, and durable construction, it is an excellent choice for both professional and amateur sound engineers looking for outstanding sound reinforcement. Whether you are performing at a small venue or using it for a large event, the Peavey 115P is engineered to meet your sound needs effectively.