Peavey Penta Tube Amplifier Specifications, Tube Complement, Rated Power and Load, Equalization

™

Tube Amplifier

SPECIFICATIONS

Tube Complement:

Four matched EL34 tubes

Four 12AX7/ECC83 tubes

Rated Power and Load:

140 W (rms) into 16, 8 & 4 ohm

External jacks are paralleled - 4 ohms minimum

The following specs are measured @ 1 kHz with the controls preset as follows: Bass, Treble & Mid EQ @ 5

Master Volume @ 1O

(Nominal levels are with Pre Gain @ 5. Minimum levels are with Pre Gain @ 10.)

Preamp Input Section (1st channel):

Nominal Input Level: 0 dBV, 1V RMS

Minimum Input Level: -20 dBV, 100 mV RMS

Maximum Input Level: 6 dBV, 2V RMS

System Signal-to-Noise:

(1st channel - 20 Hz to 20 kHz unweighted) (Pre Gain set halfway)

Greater than 80 dB below rated power

Equalization:

Custom Bass, Mid, & Treble passive type EQ for each mode

Remote Footswitch (included):

Heavy duty 1-button footswitch

Power consumption:

Domestic: 300 watts, 60 Hz, 120 VAC

Export: 300 watts, 50/60 Hz, 220-230/240 VAC

Dimensions:

17.875" H x 21.375" W x 10.25" D (45.40 cm x 54.29 cm x 26.03 cm)

Weight:

57.8 lbs. (26.24 kg) with power supply

Specifications subject to change without notice.

12