Peavey owner manual Q 215FX SPECIFICATIONS

Q™ 215FX SPECIFICATIONS

All specifications are typical unless otherwise noted.

0 dBV = l volt

All specifications are referenced to nominal output level (0 dBV) unless otherwise stated.

All measurements are wideband 20 Hz to 20 kHz unless otherwise stated.

NOTE: All specs measured at 1 V RMS input and unbalanced output.

All sliders at mid position, all switches out unless otherwise noted.

Frequency Response:

±1 dB 20 Hz to 20 kHz

Distortion:

.005% 20 Hz to 20 kHz

Input Impedance:

Balanced 20 k ohms (equal impedances to ground)

Output Impedance:

330 ohms

Maximum Input Level:

+18 dBV (8 V RMS)

Maximum Output Level:

+18 dBV (8 V RMS)

Nominal Input Level:

0 dBV (1 V RMS)

Nominal Output Level:

0 dBV (1 V RMS)

Input Headroom:

Nominal 18 dB

Output Headroom:

18 dB

Output Noise:

EQ in bypass: -100 dBV

EQ in. all flat: -98 dBV

Filter Frequencies:

25 Hz, 40 Hz, 63 Hz, 100 Hz, 160 Hz, 250 Hz, 400 Hz, 630 Hz, l kHz, 1.6 kHz, 2.5 kHz, 4 kHz, 6.3 kHz, 10 kHz, and 16 kHz

Filter Q:

2.3

Maximum Boost and Cut Filter:

+12 dB, -18 dB

Maximum Boost and Cut Gain: (Wideband Gain)

±15 dB

Low Cut Filter:

40 Hz

Power Consumption:

Domestic: 120 V AC, 60 Hz, 20 watts

Export: 220/230-240 V AC, 50/60 Hz, 20 watts

Dimensions and Weight: 3.5" H x 19" W x 11.375" D 10.1 lbs.

U.S. Patent pending for circuit providing visual indication of feedback.

TM®

Due to our efforts for constant improvements,

features and specifications listed herein are subject to change without notice.

6