For Flat Back Screen
Begin with the shortest length screw, hand thread through | |
| included) into screen as shown below. Screw must make at least three full turns into the mounting hole and fit |
snug into place. Do not over tighten. If screw cannot make three full turns into the screen, select a longer length screw from the security fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.
NOTE: Spacers may not be used, depending upon the type of screen.
FLAT BRACKETS
SCREEN
SCREW
FLAT
BRACKET
TILT BRACKETS
SCREEN
SCREW
TILT
BRACKET
If you have any questions, please call Peerless customer care at
For Bump-out or Recessed Back Screen
Begin with longer length screw, hand thread through | ||
| spacer in that order into screen as shown below. Screw must make at least three full turns into the mounting hole | |
| and fit snug into place. Do not over tighten. If screw cannot make three full turns into the screen, select a longer | |
| length screw from the security fastener pack. Repeat for remaining mounting holes, level brackets and tighten | |
| screws. |
|
| FLAT BRACKETS | TILT BRACKETS |
SCREEN |
|
SPACER |
|
| |
| SCREW |
| FLAT |
| BRACKET |
SCREEN |
SPACER |
SCREW |
ADAPTER |
BRACKET |
If you have any questions, please call Peerless customer care at
4 of 9 | ISSUED: |
Visit the Peerless Web Site at | For customer care call |
