Peerless Industries HLG452-002-Q10 manual Tools Needed for Assembly, Accessory

NOTE: Read instruction sheet before you start installation and assembly. Parts may appear slightly different than illustrated.

Before you begin, make sure all parts shown are included with your product.

	Parts List
			HLG452-002	HLG452-002-Q10
	Description	Qty. Part #		Qty.	Part #
A lock-down plate		1	090-1757	10	090-1757
B	1/4-20 x 1 3/4" carriage bolt	2	520-1017	20	520-1017
C plastic cap		2	590-1294	20	590-1294
D 1/4-20 slope nut		3	530-0035	30	530-0035
E adhesive strip		4	570-0017	40	570-0017

A

B C

E

D

Tools Needed for Assembly

•drill

•1/4" drill bit

•5/8" open box wrench

•phillips screwdriver

•5/32 allen wench

•3M™ Rubber & Vinyl 80 Spray Adhesive (generic name: Contact 80 Neoprene Vinyl Spray Adhesive)

This product can be found at hardware and craft stores, as well as on the 3M website: http://solutions.3m.com/.

Accessory

•ACC939 - 1/4-20 x 2.25" carriage screws for thicker desktop surfaces

•MIS660 - Neck Security Screws for 26HFL5830D/27, 32HFL5460D/27, 32HFL5860D/27, 32HF7965D/27, 37HFL5560D/27, 42HFL5860D/27, 42HFL7580A/27, 52HFL5580D/27

•ACC943: Installation Template (plate only)

Installation Option 1 (Fasteners) Pages 3 and 4

Installation Option 2 (Adhesive Strips) Pages 5 and 6

2 of 6	ISSUED: 09-04-08 SHEET #: 090-9150-3 10-05-09
Visit the Peerless Web Site at www.peerlessmounts.com	For customer care call 1-800-729-0307 or 708-865-8870.