Cable Management
fig. 8.1
To make an opening to route cables through
8 projector mount assembly, adjust projector mount assembly to full upward tilt position by turning knob for tilt adjustment as shown in fi gure 8.2. Left or right roll position can be adjusted if more space is required.
NOTE: Be certain tamper resistant screws are not engaged before making adjustments (see step 9).
Route cables through top of extension column as shown in fi gure 8.1 and fi gure 8.2.
NOTE: A method for assisting cables through extension column may be required (example: string tied to connector to help pull through extension column).
Route cables through projector mount assembly as shown in fi gure 8.2 and connect to projector.
CABLES WITH COMBINATION
OF VGA CONNECTOR
AND RCA PLUGS
BEND WIRES OF RCA
PLUGS IN OPPOSITE
DIRECTION
ROUTE
CONNECTOR THROUGH 
FIRST 
DO NOT
CRIMP
WIRES
NOTE: INNER DIAMETER OF EXTENSION COLUMN MAY NOT ALLOW PASSAGE FOR ALL CONNECTOR TYPES.
CABLE
CONNECTOR
INNER
DIAMETER OF
EXTENSION
COLUMN
fig. 8.2
EXTENSION COLUMN
KNOB
FOR ROLL
ADJUSTMENT
OPENING
FOR ROUTING
CABLES
KNOB FOR TILT ADJUSTMENT
10 of 13 | ISSUED: |
Visit the Peerless Web Site at www.peerlessmounts.com | For customer care call |
