Peerless Industries SP 850-S, SP 850P-S manual For Vesa 200 Mounting Pattern

FOR VESA 200 MOUNTING PATTERN:

Thread two M4 x 12 mm screws (BB), leaving .25" exposed thread, into top holes on back of screen. Hook screen onto mounting plate, and attach using two bottom M4 x 12 mm screws as shown in figures 4.3 and 4.4. Tighten all four screws.

FOR SCREENS WITH VESA MOUNTING PATTERN IN A POCKET:

Thread two retaining spacers (L) onto two M4 x 20 mm screws (CC), leaving .25" exposed thread as shown in figure

4.5.Thread M4 x 20 mm screws with retaining spacers into top holes on back of screen. Hook screen onto mounting plate, and attach using bottom two M4 x 20 mm screws and retaining spacers as shown in figures 4.3 and 4.4. Tighten all four screws.

MOUNTING PLATE		MOUNTING PLATE
		(NOTE: MOUNTING PLATE
(NOTE: MOUNTING PLATE
		SHOWN WITHOUT FULL
SHOWN WITHOUT FULL
	fig. 4.3	WALL MOUNT ASSEMBLY	fig. 4.4
WALL MOUNT ASSEMBLY
		FOR CLARITY)
FOR CLARITY)

fig. 4.5

For screens with a hole pattern in a pocket, spacers (L) go between mounting plate and screen.

Note: Flat panel screen may appear slightly different than illustrated.

For screen compatibility please refer to the plasma interface list on our website www.peerlessmounts.com or call customer care for a screen specific adapter bracket (PLP models).

FOR INSTALLING TO PEERLESS PLP MODEL ADAPTER BRACKET (not UL listed)

Note: Refer to PLP model adapter bracket instruction sheet for attachment of adapter bracket to screen.

5	Thread two M10 x 15 mm screws (K), leaving .25" exposed thread, into top holes on back of screen. Hook screen
	onto mounting plate, and attach using two bottom M10 x 15 mm screws as shown in figures 5.7 and 5.8. Tighten

screws using 6 mm allen wrench (not included).

	GENERICADAPTER
GENERIC	BRACKET
ADAPTER	MOUNTING PLATE
BRACKET
	K
	K
MOUNTING PLATE
(NOTE: MOUNTING PLATE
SHOWN WITHOUT FULL
WALL MOUNT ASSEMBLY	fig. 5.7	fig. 5.8
FOR CLARITY)

7 of 10 ISSUED: 10-12-05 SHEET #: 202-9038-6 05-19-07