Pelco BB5L Unpacking Instructions, Recommended Tools, Back Box Parts, In-Ceiling Models

1.3 UNPACKING INSTRUCTIONS

Unpack and inspect all parts carefully.

Be sure to save the shipping box and any inserts. They are the safest material in which to make future shipments.

If an item appears to have been damaged in shipment, replace it properly in its box and contact the factory at 1-800-289-9100 or 1-209-292-1981 for a replacement. (International customers fax 1-209-348-1120 for authorization and instructions.)

If an item needs to be returned to the factory for repair, consult the WARRANTY AND RETURN section of this manual for instructions.

The following items are supplied:

IN-CEILING MODELS

1 Back box

1Installation/Operation Manual (C1488M)

1Parts bag (refer to Figure 1)

1 Conduit fitting

1 Safety chain bracket

1 Lock nut

1 Compass tool

4 T-rail clip (clip, L-bracket, screw, lock washer, nut)

PENDANT MODELS

1 Back box

1 Tube of pipe sealant

1Installation/Operation Manual (C1488M)

1.4RECOMMENDED TOOLS

Pelco does not supply basic tools needed for the installation process. The following tools are recommended:

Small flat screwdriver

Coaxial cable stripper

BNC crimp tool

Wire stripper

Wire cutter

Pen or pencil (in-ceiling models only)

Drill with 3/32-inch drill bit (in-ceiling models only)

Saw to cut hole in ceiling (in-ceiling models only)

Medium Phillips screwdriver (in-ceiling models and pendant surface-mount only) Drill with hole saw (pendant surface-mount only)

COMPASS TOOL

SAFETY	CONDUIT FITTING	T-RAIL CLIP
BRACKET	& LOCK NUT

Figure 1. Back Box Parts

Pelco Manual C1488M-A (9/98) 5