PARTS OF THE RECEIVER

 

 

 

 

 

 

 

 

 

 

MODEL

 

 

 

 

 

 

 

SN

 

 

 

 

 

 

 

FREQ

 

 

 

W

￿

 

￿

 

 

 

 

 

 

 

￿

 

 

 

 

 

 

 

￿

 

 

 

 

 

 

+

￿

1 2 3 45

 

 

 

 

 

-

 

 

 

 

￿

 

 

INCLUSINGINTERFEREN CETHAUNDESIRED CAUSEAYOPERATTIONM.

AND(2) THISDEVICE MUSTINTERFERENCERECEIVED,ACCEPT ANY

 

OPERATIONIS SUBJECTTOFOLLOWINGCONDITIONS: THETWO

 

￿

 

￿

(1)THIS DEVICEMA YNOTINTERFERENCE,CAUSEHARMFUL

THISDEVICE COMPLIESWITH PARTRULESFCCTHEOF15.

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 1. TW3001AR Parts

￿Rubber Feet (4): For placing unit on a flat surface, such as a desk or shelf.

￿Status LED: Lights red when there is no UTP video being received. Lights green when there is UTP video being received. Flashes amber when Coaxitron pan/tilt/zoom (PTZ) control commands are being received.

￿Pelco Badge: Lights blue to indicate power when using either the 4-pin rack power connector or the 2-pin power connector.

￿Rack Power Connector: 4-pin, power from RK5000PS-3U.

￿Power Connector (3.5 mm): 2-pin; stand-alone power, 12 VDC or 24 VAC.

￿UTP Connector (2.5 mm): 2-pin connector with removable mating connector.

￿BNC Connector: Coaxial output.

￿DIP Switch: Override the adaptive technology with the manual selection of cable distance (1,000 to 4,000 feet or 305 to 1,219 meters). Switch 5 is used for selecting high mode or low mode.

6

C1666M-A (4/06)

Page 6
Image 6
Pelco C1666M-A (4/06) manual Parts of the Receiver