SECURING THE MONITOR
1.Refer to Figure 2. Make sure the mounting bracket angle is set to zero.
2.Attach the mounting bracket to the wall using screws (not included) that are large enough to support the weight of the mount and the monitor and that are appropriate for the wall material. Ensure the mounting bracket is secured tightly.
WARNING: Dry wall may not be sturdy enough to support the combined weight of the monitor and the mount. Attach the mount to studs, if possible; if not, attach plywood to the studs and the mount to the plywood. Use enough screws when attaching the mount to ensure the monitor’s weight is evenly and adequately supported.
3.Refer to Figure 3. Remove the four screws from the back of the monitor as shown.
4.Assemble the hangers. Place a washer (included) onto each of the four screws that came with the mounting kit. Insert the screws and washers into the four plastic hangers.
5.Screw the four plastic hangers into the screw holes in the back of the monitor.
SCREW (4 EA) | WASHER (4 EA) | PLASTIC | NUT (4 EA) |
|
| HANGER (4 EA) |
|
Figure 3. Installing Plastic Holders
8 | C2230M (2/07) |
