10 C2403M-E (2/08)
Install Dome and Trim Ring
Domes with Liners (only):
1. Align the screw holes in the trim ring with
those in the Camclosure base.
2. Position the viewing window over the lens of
the camera.
a. Loosen the three Phillip screws located
in the dome.
b. Insert the blade of a standard
screwdriver in one of the adjustment
grooves. Move the dome into position.
c. Tighten the three Phillip screws to lock
the liner in place.
3. Tighten the tamper-resistant screws with the supplied 1/8-inch hollow screwdriver bit.
LOOSEN SCREWS
ADJUSTMENT
GROOVE
DOME LINER