C2487M-A (4/05) 37
<Alarms>Set the alarm contact:
1. Use the joystick to position the cursor beside ALARM CONTACT.
2. Press Iris Open. The cursor moves to the right.
3. Move the joystick up or down to view the following available selections.
N/O (default) Normally open
N/C Normally closed
4. Press Iris Open to enter selection.
NOTE: The alarm feature is functional only if the dome drive is installed in a Spectra III SE
backbox.
BACK
EXIT
ALARM CONTACT N/O
ALARMS
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<ALERT>*
<CLEAR>
<PASSWORD>
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
(See page 9)
Quick Programming Guide
*This setting only applies to Pressurized
Spectra III dome systems with software
version 1.27 or higher.