C2487M-A (4/05) 5
WELCOME
Thank you for purchasing Pelco’s premier integrated dome system, Spectra III. Your new system
features a high resolution, day/night camera/optics package with IR filter and programmable
dome drive software.
This manual is designed to be a reference tool for the operation and programming of your
system. Inside you will find information about Spectra III’s features and commands, as well as a
detailed menu tree.
Getting Started
You will need to install your dome system before using this manual. Refer to the installation
packet supplied with the back box for installation instructions.
Once installed apply power to the Spectra III dome system. The system will start a configuration
sequence. When configuration is done, the following information is displayed:
Pelco Spectra III
Version X.XX*
D Address: 1
P Address: 2
Comm 2400, N, 8, 1
CONFIGURE DONE
This information will remain on the monitor until dome operation begins.
Refer to the following pages to learn how to operate and program your dome system.
*Pressurized Spectra III dome systems require software version 1.27 or higher to monitor
temperature, pressure, and dew point.