CONTENTS
Section | Page |
IMPORTANT SAFEGUARDS AND WARNINGS | 3 |
WELCOME | 4 |
INSTALL THE BACK BOX | 5 |
REMOVE THE LOWER DOME | 5 |
INSTALL THE BACK BOX | 5 |
ATTACH DIRECTLY TO A WALL/CEILING | 5 |
ATTACH TO A 4S DEEP ELECTRICAL BOX | 6 |
INSTALL IN A CEILING TILE | 7 |
INSTALL THE CAMERA MODULE | 8 |
CHECK HEATER JUMPER | 8 |
INSTALL AND POSITION THE CAMERA | 9 |
MAKE CAMERA SETTINGS | 10 |
ZOOM/FOCUS | 10 |
DIGITAL SLOW SHUTTER (DSS) | 11 |
AGC (AUTOMATIC GAIN CONTROL) | 11 |
BLC (BACK LIGHT COMPENSATION) | 11 |
VERTICAL PHASE ADJUSTMENT (24 VAC OPERATION ONLY) | 12 |
HOW TO ADJUST THE PHASE CONTROL | 12 |
VARIFOCAL LENS AUTO IRIS LEVEL ADJUSTMENT | 12 |
REINSTALL THE DOME AND TRIM RING | 13 |
SPECIFICATIONS | 14 |
WARRANTY AND RETURN INFORMATION | 15 |
LIST OF ILLUSTRATIONS |
|
Figure | Page |
1 Installation Directly to Wall/Ceiling | 5 |
2 Installation to 4S Deep Electrical Box | 6 |
3 Ceiling Tile Installation | 7 |
4 Heater Jumper and Camera Connector Locations | 8 |
5 Default Switch Settings and Location of Camera Adjustments | 10 |
6 Dome and Trim Ring Installation | 13 |
2 |
