PRODUCT WARRANTY AND RETURN INFORMATION

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.

Exceptions to this warranty are as noted below:

Five years on FR/FT/FS Series fiber optic products and TW3000 Series unshielded twisted pair transmission products.

Three years on Genex® Series products (multiplexers, server, and keyboard).

Three years on Camclosure® and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models, which have a five-year warranty.

Three years on PMCL200/300/400 Series LCD monitors.

Two years on standard motorized or fixed focal length lenses.

Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed dome products.

Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in continuous motion applications.

Two years on Esprit and WW5700 Series window wiper (excluding wiper blades).

Two years (except lamp and color wheel) on Digital Light Processing (DLP®) displays. The lamp and color wheel will be covered for a period of 90 days. The air filter is not covered under warranty.

Eighteen months on DX Series digital video recorders, NVR300 Series network video recorders, and EnduraSeries distributed network-based video products.

One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months.

Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product lia- bility, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at (800)þ289-9100 or

(559)292-1981 to obtain a Repair Authorization number (RA), and provide the following information:

1.Model and serial number

2.Date of shipment, P.O. number, Sales Order number, or Pelco invoice number

3.Details of the defect or problem

If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written explanation with the product when returned.

Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.

RETURNS

In order to expedite parts returned to the factory for repair or credit, please call the factory at

(800)289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair).

All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.

Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid. Ship to the appropriate address below.

If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:

Service Department

Pelco

3500 Pelco Way

Clovis, CA 93612-5699

If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed to return goods to the USA, you may do one of the following:

If the goods are to be sent by a COURIER SERVICE, send the goods to:

Pelco

3500 Pelco Way

Clovis, CA 93612-5699 USA

If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:

Pelco c/o Expeditors 473 Eccles Avenue

South San Francisco, CA 94080 USA Phone: 650-737-1700

Fax: 650-737-0933

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.

REVISION HISTORY

Manual #

Date

Comments

C2493M

12/05

Original version.

Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco.

DLP is a registered trademark of Texas Instruments, Inc.

©Copyright 2005, Pelco. All rights reserved.

Page 7
Image 7
Pelco C2493M manual Product Warranty and Return Information

C2493M specifications

The Pelco C2493M is a robust and versatile camera designed for high-performance surveillance applications. This camera offers a combination of advanced features, cutting-edge technologies, and superior build quality, making it an ideal choice for various security installations.

One of the main features of the Pelco C2493M is its high-resolution image sensor, which captures clear and detailed footage even in low-light conditions. The camera includes a powerful image processing engine that enhances video quality by reducing noise and improving clarity, ensuring that critical details are visible when it matters most.

The C2493M supports multiple video formats, providing flexibility in different operating environments. Its adjustable frame rates allow users to tailor the camera's performance according to their specific surveillance needs, whether monitoring a busy public area or a private facility. The camera also offers wide dynamic range (WDR) capabilities, enabling it to handle challenging lighting conditions, such as scenes with both bright highlights and deep shadows.

Another notable characteristic of the Pelco C2493M is its advanced motion detection technology. This feature analyzes video feeds in real time, detecting motion and triggering alerts, which is essential for proactive security management. Users can customize motion detection zones to reduce false alarms caused by harmless movements, ensuring that the system focuses on genuinely suspicious activity.

The C2493M is designed with durability in mind, featuring an IP66-rated weatherproof housing that protects the camera from dust and moisture. This rugged construction makes it suitable for outdoor applications, providing reliable performance in various environmental conditions.

Integration capabilities are also a highlight of the Pelco C2493M. The camera can seamlessly connect with existing security systems and management software, allowing for easy deployment in a variety of environments. This flexibility is valuable for facilities looking to enhance their security infrastructure without overhauling their current systems.

In summary, the Pelco C2493M stands out with its high-resolution imaging, advanced motion detection, durable design, and seamless integration capabilities. These features make it an excellent choice for organizations seeking a reliable security solution that adapts to their unique needs while providing exceptional video quality and performance. Whether used in retail, public spaces, or corporate environments, the Pelco C2493M delivers the reliability and functionality demanded by modern surveillance systems.