Pelco C2494M manual Unit is not connected to the network

Models: C2494M

1 8
Download 8 pages 63.86 Kb
Page 4
Image 4

4Install the back box by compressing the spring clips and pushing the back box through the hole. Tighten the screws until you hear a clicking noise.

Suspended Ceiling Only: Install the ceiling tile with the back box. Attach a T-rail clip on each side of the ceiling tile to hold the ceiling tile secure during installation of the dome drive and lower dome.

5Connect the power wires to the circuit board inside the back box. Connect any alarm and auxiliary circuits. Turn on the power to the system. The green LED on the door indicates system power is on.

NOTE: Aux 1 – Maximum 2 A at low voltage (<40 V)

ALARMS

ALARM COM

AUX1

AUX COM

POWER

6Connect a 10/100/1000BaseT network Cat5e (or better) cable to the RJ-45 network connector located inside the back box. Check the LED indicators located inside the back box to check unit status, network status, and network activity.

Unit Status LED

Green

Unit is functioning normally.

Amber

Unit is in configuration mode.

Red

Unit is in an error condition.

Network Status LED

Off

Unit is not connected to the network.

Amber

Unit is connected to a 100BaseT network.

Red

Unit is connected to a 10BaseT network.

Network Activity LED

The LED flashes whenever the unit is sending or receiving network data.

7No DIP switch settings are required for the system. Before installing the dome drive verify that switch SW1-1 (SW1, switch 1) is set to the ON position and all other switches are set to the OFF position.

The switches set the dome drive for Pelco’s D protocol, address 1, 2400 baud, and no termination.

4

SW1-1 is set to the ON position.

All other switches are set to the OFF position.

1

2 3

4

5

6

7 8

1

1

2 3

4

5

6

7 8

 

 

SW1

 

on SW2

on

 

SW3

 

ON

 

 

 

 

 

 

 

C2494M (12/05)

Page 4
Image 4
Pelco C2494M manual Unit is not connected to the network

C2494M specifications

The Pelco C2494M is an advanced surveillance camera designed to meet the demands of modern security solutions. With a compact design and robust features, it is suitable for a variety of indoor and outdoor applications, including retail, transportation hubs, and public spaces.

One of the standout features of the C2494M is its high-resolution imaging capability. With a resolution of up to 1080p, this camera captures sharp and detailed video footage, enabling operators to identify and monitor activities with clarity. The use of advanced imaging technologies such as WDR (Wide Dynamic Range) ensures excellent performance in challenging lighting conditions, allowing the camera to maintain video quality even in high-contrast environments.

The C2494M is equipped with a powerful lens that offers a wide field of view, making it ideal for capturing expansive areas without the need for multiple cameras. This feature is particularly beneficial in large venues where comprehensive coverage is paramount. Furthermore, the camera supports zoom functionalities, allowing users to focus on specific areas of interest while maintaining the overall surveillance of the vicinity.

Incorporating advanced compression technologies such as H.265, the C2494M optimizes bandwidth usage and storage requirements, making it possible to archive extensive video footage without overwhelming system resources. This efficiency is crucial for organizations looking to maximize their surveillance capabilities while keeping operational costs in check.

The camera also features robust environmental specifications, with an IP66 rating, making it resistant to dust and water exposure. This characteristic ensures its reliability in various weather conditions, suitable for both indoor installations and exposed outdoor locations.

Integration is another key attribute of the C2494M, as it supports a wide range of protocols for seamless connectivity with existing surveillance systems. Whether utilizing an IP-based infrastructure or a hybrid setup with analog systems, the camera can easily be incorporated into diverse security environments.

In summary, the Pelco C2494M is a versatile surveillance solution that combines high-resolution imaging, advanced compression, and robust environmental durability. Its features make it a reliable choice for organizations seeking to enhance their security posture while ensuring efficient use of resources. With its compact design and comprehensive coverage capabilities, the C2494M stands out as a dependable option in the realm of modern surveillance technology.