Pelco C3468M manual Stainless Steel, Revision History

STAINLESS STEEL

Construction
Back Box	316 stainless steel; gray, polyurethane powder-coated finish
Dome Drive	Aluminum, thermoplastic
Lower Dome Trim Ring	316 stainless steel; black, polyurethane powder-coated finish
Bubble	Acrylic, clear or smoked
Cable Entry (Back Box)	Through 1.5-inch NPT pendant mount
Pan Movement	360° continuous pan rotation
Vertical Tilt	Unobstructed +2° to –92°
Manual Pan/Tilt Speeds*
Pan	0.1° to 80°/sec manual operation, 150°/sec turbo
Tilt	0.1° to 40°/sec manual operation
Preset Speeds
Pan	400°/sec
Tilt	200°/sec
Environment	Indoor/outdoor
Operating Temperature	Assumes no wind chill factor; for detailed test conditions, contact
	Pelco
Maximum	140°F (60°C) absolute maximum; 122°F (50°C) sustained
	maximum
Minimum	–60°F (-51.1°C) absolute minimum; minimal icing at sustained
	minimum of –50°F (–45°C); prevents icing at sustained minimum
	of –40°F (–40°C); de-ices 0.1 inch (2.5 mm) within 3 hours after
	power-up
Weight (approximate)
Back Box	4.75 lb (2.15 kg)
Dome Drive	3.3 lb (1.48 kg)
Lower Dome	1.83 lb (0.83 kg)

*For variable-speed operation, an appropriate controller is required. With fixed-speed controllers, pan/tilt speed is 20°/sec. The CM6700/CM6800 controller with the KBD200A keyboard has configurable fixed speeds.

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.

REVISION HISTORY

Manual #	Date	Comments
C3468M	4/10	Original version.

42 C3468M (4/10)