32 C4631M (11/09)
MOTION RECORD MODE
The unit supports multi-event recording. You can configure each camera to record at a different resolution, quality, and image rate to capture
motion-triggered video. You must configure the respective camera for motion recording before the unit will respond to a motion event. Refer to
Schedule Menu on page34 for more information .
The DX4104 allows you to configure the following motion recording settings for each camera:
•Channel: Selects the channel (01 to 04) for configuration.
•Resolution: Sets the resolution for the channel. The default is 352 x 240.
•Quality: Sets the picture quality of recorded video: LOWEST, LOW, STANDARD, HIGH, HIGHEST.
•Image Rate: Sets the image rate. Refer to TableD for more information .
To set up the motion recording mode:
1. From the Camera menu, click Motion Record.
2. Click the Channel box, and select the channel to configure.
3. Click the boxes to enter their settings.
4. Repeat steps 2 and 3 to configure the other channels.
5. Click Close.
6. Click OK.
Table D. Resolution and Image Rate
Resolution Image Rate
NTSC 352 x 240 1, 3, 5, 7.5, 15, 20, 30
704 x 240 1, 3, 5, 7.5, 15
704 x 480 1, 3, 5, 7.5
PAL 352 x 288 1, 3, 5, 6, 12.5, 20, 25
704 x 288 1, 3, 5, 6, 12.5
704 x 576 1, 3, 5, 6