5-20 Pelco Manual C501M-B (10/97)
5.5.1.6 Zone Assignment Form
The Zone Assignment Form is used to provide a log
and brief description of each zone programmed by the
CM8500 system. The Zone option can be accessed only
when Spectra™ and Intercept® series receivers are be-
ing utilized. Each Spectra™ and Intercept® product can
have up to eight zones defined by the CM8500 system.
CAMERA
(input)
NUMBER This is the number assigned to the
camera as defined by its input into
the CM8500 system.
LOCATION This is the physical location of the
camera.
RECEIVER
TYPE Enter the part number of the receiver
associated with the camera site.
Camera/Lens
Config Enter the make and model of the
camera and lens used at the camera
site. You also may wish to include
focal length (2/3-inch, 1/2-inch) and
camera type (Color or B/W).
ZONE This is the number assigned to the
zone to be scanned.
Description This section should contain a brief
description of what the zone will be
when accessed.
LABEL This is a 20-character alphanumeric
description used to provide informa-
tion to the user about the location of
the zone. The description appears in
the upper left corner of the monitor
screen when the zone is accessed.
COMMENTS Use this section for any additional
comments regarding the zone.
ZONE ASSIGNMENT FORM
1
2
4
8
7
3
5
6
ZONE DESCRIPTION LABEL COMMENTS
CAMERA (INPUT) NUMBER LOCATION
RECEIVER TYPE CAMERA/LENS CONFIGURATION