10 Pelco Manual C534M (2/98)
5.0 MAINTENANCE
5.1 REPLACING THE FUSE
The unit is equipped with a 2A fuse on the input. The fuse holder is located on the
rear panel of the unit. To replace the fuse, first remove power to the unit by discon-
necting the power at the wall socket. Rotate the fuse holder counterclockwise until
the fuse holder comes out of its receptacle. Replace the fuse.
WARNING:
Always re-
place a blown fuse with a
fuse of the same rating. Fail-
ure to do so could result in
serious damage to the unit.