1.2 REGULATORY NOTICES
NOTE: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are de- signed to provide reasonable protection against harmful interference in a residen- tial installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter- mined by turning the equipment off and on, the user is encouraged to try and cor- rect the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
1.3UNPACKING INSTRUCTIONS
Unpack and inspect all parts carefully.
The following items are supplied:
1CX9000 Series Coaxitron® Receiver/Driver
1Installation/Operation Manual
Be sure to save the shipping carton, boxes and inserts. They are the safest material in which to make future shipments.
If an item appears to have been damaged in shipment, replace it properly in its box and contact the factory at
If an item needs to be returned to the factory for repair, consult the WARRANTY AND RETURN INFORMATION section of this manual for instructions.
1.4 RECOMMENDED TOOLS
Pelco does not supply the basic tools needed for the installation process. The fol- lowing tools are recommended.
Medium adjustable wrench or socket wrench
Medium Phillips screwdriver (to open anodized metal box)
Power drill
Wire stripper
Wire cutter
AMP type crimper
6 | Pelco Manual |
