Pelco Manual C416M-C (1/98) 19
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
7.0 SPECIFICATIONS
MECHANICAL
Pan Movement in horizontal plane:
DD08C2L/
DD08E2L
models: 0-355° with pan limit stops
360° without pan limit stops
DD08E3L
model: 360°
Tilt: -90° movement from horizontal plane
Pan and Tilt
Speeds: The following speeds are available and pre-selected by cus-
tomer at time of order:
Dome Drive
Type Pan Speed Tilt Speed
DD08C2L 24°/sec ± 1°12°/sec ±.5°
DD08E2L 24°/sec ± 1°12°/sec ±.5°
DD08E3L Variable (0 – 200°/sec) 0–40°/sec ±.5°
Motors: Synchronous, continuous duty, instantaneous reversing
(DD08C2L and DD08E2L)
Stepper (DD08E3L)
Connectors
Video: BNC
Gearing: Spur gear
Bearings
Pan: Roller thrust bearings and Oilite bronze bushing
Tilt: Sealed ball bearing
Braking DD08C2L and DD08E2L: Friction
DD08E3L: Magnetic locking
ELECTRICAL
Power
Requirements: Variable Speed Unit All Others
Pan 24 vA 7.5 vA
Tilt 24 vA 7.5 vA
Idle 15 vA —
Maximum Current: 2 amps per conductor
Camera Input
Voltage: 24 VAC
Limit Switches
Pan: 5 amp (external adjustment)- DD08C2L & DD08E2L models only
Tilt: 5 amp (factory set)
GENERAL
Construction
Pan/Tilt: Aluminum with stainless steel hardware
Dome Liner: Plastic
Max. Weight: 11 lbs (5 kg)
(combined weight of dome drive with camera/lens, integral
receiver/driver and dome)