12 Pelco Manual C680M-G (7/01)
3. Use the Search (<</>>) buttons to move around within the menu. Highlight Alarm Out-
put and press the Play/Pause button to select. The Alarm Output menu appears.
4. Use the Search (<</>>) buttons to highlight the fields for starting and ending times.
When you highlight a field, use the number buttons to enter the time. The starting and
ending times refer to the hour. Enter two digits. Enter the hours in 24-hour format. For
example, enter 08 for 8 a.m. and 15 for 3 p.m.
At the bottom of the screen is a bar that shows the hours when the alarm output will
be enabled. Red means enabled and white means disabled.
5. Use the Search (<</>>) buttons to highlight Automatically Enable Alarm Output, and
then press the Play/Pause button to toggle between On or Off.
6. When you finish, use the Search (<</>>) buttons to highlight Quit, and then press the
Play/Pause button to select. The Setup Menu appears.
7. Use the Search (<</>>) buttons to highlight another menu item in the Setup Menu
and then press the Play/Pause button to select it, or highlight Exit and then press
the Play/Pause button to end the programming session.
ALARM OUTPUT
Enable Alarm Output: 00
Disable Alarm Output: 24
Automatically Enable
Alarm Output: On
Quit
00425