8Pelco Manual C680M-G (7/01)
5. The fps (Frame Per Second) field shows the recording rate for all cameras.
To change the fps, use the Search (<</>>) buttons to highlight fps, and then use the
number keypad to enter the frames per second. The maximum frames per second is
determined by the number of cameras being recorded and whether the Preview feature
is on or off. Refer to Table B for the maximum frames per second. Refer to Table C in
the
Operation
section for recording times.
Table B. Maximum Frames per Second
Cameras Preview On Preview Off
11530
2 5 7
3 3 5
4 2 3
6. To configure any of the four cameras, use the Search (<</>>) buttons to highlight the
camera number, and then press the Play/Pause button. The menu for that camera
appears.
CAMERA OPERATION
7. Use the Search (<</>>) buttons to highlight Camera Operation, and then press the
Play/Pause button to toggle between On or Off. On means the DVR will record video
for that channel, and Off means it will not record video, even if a camera is connected.
AUTOMATIC RECORDING
8. Use the Search (<</>>) buttons to highlight Automatic Recording, and then press the
Play/Pause button to toggle between On or Off. On means the DVR will record auto-
matically during the times you will select in the following steps. Off means you will
manually turn the recorder on and off.
AUTOMATIC RECORDING TIME CHANGE
9. Use the Search (<</>>) buttons to highlight Automatic Recording Time Change, and
then press the Play/Pause button to select. The Automatic Recording Time Change
menu appears.
IMPORTANT NOTE:
If
camera inputs are not used,
make sure Camera
Operation is OFF. Video
washout occurs if unused
inputs are left on. The
degree of washout depends
on how many inputs have
no cameras connected to
them. The most severe case
is when all inputs are turned
on but only one camera is
connected; in this case the
video is completely washed
out.
CAMERA 1*
Camera operation: On
Automatic Recording: On
Automatic recording time change
Resolution
Quit
* Same menu for cameras 2-4.
00424
00426