14 Pelco Manual C680M-G (7/01)
PASSWORD MENUUse this menu to change the password (optional).
Skip steps 1 and 2 if you are already in the Setup Menu.
1. Press and hold the Function button. The Function Key List appears. Keep holding the
Function button.
FUNCTION KEY LIST
0 : Setup
1 : Camera 1 recording/stop
2 : Camera 2 recording/stop
3 : Camera 3 recording/stop
4 : Camera 4 recording/stop
5 : All the cameras recording
6 : All the cameras stop
: Alarm On
: Alarm Off
SETUP MENU
Camera
AllResolution
Alarm Output
Time
Password
Exit
Help: ON
PASSWORD
User level password protection: Off
Password change
Quit
ENTER PASSWORD
“Input your password.”
2. Press and release the 0 button, and then release the Function button. Enter the pass-
word if requested. The Setup Menu appears.
3. Use the Search (<</>>) buttons to move around within the menu. Highlight Password
and press the Play/Pause button to select. The Password menu appears.
4. Use the Search (<</>>) buttons to highlight User Level Password Protection, and then
press the Play/Pause button to toggle between On or Off.
5. Use the Search (<</>>) buttons to highlight Password Change, and then press the
Play/Pause button to select. The Enter Password screen appears.
6. The DVR ships from the factory with a password of 0000. Enter four numbers for a
new password.
7. You will be prompted to verify your password by entering it a second time. If the two
passwords agree, “Registered” appears on the screen and then the Password menu
reappears. If the passwords do not agree, “Registration Cancelled” appears on the
screen and then the Password menu reappears.
8. Use the Search (<</>>) buttons to highlight Quit, and then press the Play/Pause but-
ton to select. The Setup Menu appears.
9. Use the Search (<</>>) buttons to highlight another menu item in the Setup Menu
and then press the Play/Pause button to select it, or highlight Exit and then press
the Play/Pause button to end the programming session.