Pelco Manual C680M-G (7/01) 7
CAMERA MENUUse this menu to define the following:
•Which cameras the DVR will record
•Whether starting and stopping of recording will be done manually or automatically
•What the record rate (frames per second) will be
• What the recording resolution (low to high) will be
•Whether live video can be viewed in record mode
•Starting and stopping times for scheduled recording
Skip steps 1 and 2 if you are already in the Setup Menu.
1. Press and hold the Function button. The Function Key List appears. Keep holding the
Function button.
2. Press and release the 0 button, and then release the Function button. Enter the pass-
word if requested. The Setup Menu appears.
3. Use the Search (<</>>) buttons to move around within the menu. Highlight Camera
and then press the Play/Pause button to select. The Camera menu appears.
4. If the Preview field shows On, live video from the cameras will appear on the monitor
while the DVR is recording or is in recording standby mode (not recording).
If the Preview field shows Off, live video will not be shown.
To change the Preview status, use the Search (<</>>) buttons to highlight Preview,
and then press the Play/Pause button to toggle between On and Off.
FUNCTION KEY LIST
0 : Setup
1 : Camera 1 recording/stop
2 : Camera 2 recording/stop
3 : Camera 3 recording/stop
4 : Camera 4 recording/stop
5 : All the cameras recording
6 : All the cameras stop
: Alarm On
: Alarm Off
SETUP MENU
Camera
AllResolution
Alarm Output
Time
Password
Exit
Help: ON
CAMERA
Camera 1: On
Camera 2: On
Camera 3: On
Camera 4: On
Preview: On
fps (Frame Per Second): 01
Quit