3.Attach the silver part label that came in your upgrade kit to the inside of your DVRÕs front door.
a.Remove the paper backing from the part label.
b.Carefully place the label,
c.Press down firmly to ensure that the label properly adheres to the inside of the door.
NOTE: In the event that your unit or its components require service, part labels must be present and appropriately affixed to the unitÕs door. Pelco product support personnel use these labels to identify the exact components installed in your system. A separate part label is required for each upgrade component installed on the DX8000.
DX8000-MUX16
04117-47E-ED01
Figure 18. Product Label
C1601M (6/04) | 19 |
