Pelco Dx8000 installation manual Equipment Rack Mounting

Equipment Rack Mounting

To install the unit in an equipment rack:

1.Remove the 12 screws fastening both left and right side plates to the unit. Save the side plates and screws for possible future use.

Figure 4. Remove Left and Right Side Plates

2.Attach the handles to the rack ears using the four provided 10-32 x .375-inch Phillips flat head screws. Refer to Figure 5.

3.Using two of the supplied #4 sheet metal Phillips .375-inch pan head screws for each side, attach the rack ears to the unit.

(4) SCREWS, 10-32 X .375-INCH PHILLIPS, FLAT HEAD WITH WASHERS

(4) SCREW,#4, SHEET METAL, PAN HEAD,

PHILLIPS BLACK, .375-INCH (2 EACH SIDE)

RACK EAR

Figure 5. Attaching Rack Ears and Handles

6 C623M-ADDEN (3/04)