55.To perform a quick format:
a.Click Next four times.
b.Click the “Perform a quick format” check box.
c.Click Next, and then click Finish.
56.Repeat step 54 until all drives are formatted. Once formatted, the disk status changes from Unallocated to Healthy.
57.Click Close to close the Computer Management application.
ALLOCATING THE NEW DX8100HDDI DRIVES
58.Start the DX8100 Allocation Management application:
a.Go to Start > Run. The Run dialog box appears.
b.In the Open
c.Click OK.
59.The Security Warning dialog box appears. Click Run.
60.The Allocation Management dialog box appears. Click
61.A completion message appears. Perform the following steps:
a.Click OK.
b.Go to Start > DX8100. The DX8100 application is launched and the PDB Initialize dialog box appears.
62.Click the plus (+) to display the available partitions.
63.Select the Allocate option on all partitions:
a.Click the “Not used” button. A shortcut menu appears.
b.Click Allocation.
64.Repeat step 63 until all partitions are set to Allocation.
65.After all partitions are set to Allocation, click “Begin allocation.”
66.When the warning message appears, click Yes. After all partitions are allocated, the DX8100 application automatically starts and begins recording data to the DX8100’s internal storage (if not disabled) and to the DX8100HDDI.
C3648M (7/08) | 37 |
