Pelco dx8100 CONNECTING THE DX8100HDDI TO THE DX8100, TURNING ON THE DX8100HDDI AND THE DX8100

CONNECTING THE DX8100HDDI TO THE DX8100

Refer to Figure 13 to perform the following steps:

1.Plug one end of the VHDCI-to-VHDCI SCSI cable into port CH 1/A on the DX8100-ISCI SCSI card.

2.Plug the other end of the SCSI cable to the DX8100HDDI CH0-In connector.

3.Insert both DX8100HDDI power supply cords in to the unit and plug the cords in to a wall socket.

DX8100

IN1

IN2

IN3

IN4

IN5

IN6

IN7

IN8

IN9

IN10

IN11

IN12

IN13

IN14

IN15

IN16

OUT1

OUT2

OUT3

OUT4

OUT5

OUT6

OUT7

OUT8

OUT9

OUT10

OUT11

OUT12

OUT13

OUT14

OUT15

OUT16

ALARM INPUTS								RELAY OUTPUTS
1	2	2	4	5	6	7	8 GND	1	2	2	4	5	6	7	8 GND
9	10	11	12	13	14	15	16	9	10	11	12	13	14	15	16

								DX8100HDDI
				1.	Ready	4.	C_Dirty
				2.	Hst Bsy	5.	BBU Fail
		CH0-Out	CH1-Out	3. Dry Bsy
				1.
				2.		4.
		C	CH1-In	3.		5.COM
OPEN	Pull out Fan Only	OPEN	OPEN Pull out Fan Only	OPEN			OPEN	Pull out Fan Only	OPEN

SCSI CABLE

Figure 13. DX8100 to DX8100HDDI SCSI Connection

TURNING ON THE DX8100HDDI AND THE DX8100

1.Turn on both DX8100HDDI power supplies (refer to Figure 13) and verify that “Ready” is displayed on the LCD. NOTE: You must wait until the DX8100HDDI displays the Ready status before turning on the DX8100.

PWR

BUSY

MUTE

ATTEN

ESC ENT

Figure 14. DX8100HDDI in Ready Status

2.Turn on the DX8100. The application starts automatically and begins recording data to the DX8100’s internal storage (unless disabled) and to the DX8100HDDI.

C3648M (7/08) 17