C662M-E (5/03) 33
Figure 31. Edit Time Zone Dialog Box
5. Verify that the “Automatically set Daylight Saving Time” checkbox is selected, if applicable for the location of installation.
6. Click OK.
7. Close the Windows NT Time Zone Editor.
8. Click Configure.
Figure 32. Verify Settings Dialog Box
9. Click Yes.
Figure 33. Operation Complete Dialog Box
10. Click OK.
11. Select the “Define time synchronization chain” checkbox from the Server Configuration Utility dialog box.
12. Click Suggest. The recorders that you exported previously from the Client Configuration Utility appear.
13. Click Configure.