66 C662M-E (5/03)
DATA TRANSLATOR INTEGRATION
The following steps show how to configure a data translator unit. This programming is required only on the recorder that is
physically connected to the CM9760-DT.
1. Go to Start > Programs > DX9000 Server > I/O Handler Configuration.
Figure 74. Data Translator I/O Handler Configuration
2. Click Select Driver to define the external device driver that is connected to the server.
Figure 75. CM9760 Data Translator Driver
3. Select CM9760DT.dll.
4. Click Open.
Figure 76. Device 1 Data Translator Driver
5. Click Configure.