64 C662M-E (5/03)
RELAY UNIT INTEGRATION
The following steps show how to configure a relay unit. This programming is required only on the recorder that is physically
connected to the CM9760-REL.
1. Go to Start > Programs > DX9000 Server > I/O Handler Configuration.
Figure 70. Relay I/O Handler
2. Click Select Driver to define the external device driver that is connected to the server.
Figure 71. CM9760 Relay Driver
3. Select CM9760REL.dll.
4. Click Open.
Figure 72. Device 1 Relay Driver
5. Click Configure.